Specifications
Type of construction
- RCC frames structure designed for earthquake resistance (seismic zone 3).
- Generally outer walls will be 8” thick and inner partition walls will be 4” thickness.
Flooring & wall finishing
- Flooring will be with good quality 4’ x 2’ Vitrified tiles for the Foyer, Living, Bedrooms, Kitchen & Dining area with 4” skirting.
- Toilet tiles will be a blend of imported digital tile.
- Toilet flooring will be Firm foot – grip tiles.
- In the wash area Ceramic tiles will be provided up to the Parapet wall height or will be in line with kitchen dado.
- 20mm black granite slab will be provided for kitchen cooking platform with 8” X 12” ceramic dado (2’ above counter).
COMMON AREA FLOORING
- Ground Floor Entrance & Lift Lobbies: Imported tile.
- Typical Floor Lift Lobbies: Imported tile
- Staircase : Restile/Equivalent Flooring.
- Corridors: Vitrified/Ceramic Tile Flooring Lift Jamb will be Granite will be provided.
Doors
- Main Door Frame will be Polished teak wood frame with both side Laminated Flush Door Shutter with Godrej Highly secured digital locks.
- Other doors will be good quality wooden frames with both sides Laminated Flush Door Shutter.
- All door fittings will be SS fittings.
Windows and ventilators
- MS grills (painted) will be provided with all windows.
- Windows & Ventilator will be UPVC casement fitted with 4mm thickness glass as per builder’s choice.
Paint
- Ceiling painting OBD over putty.
- Putty with Acrylic Emulsion for interior walls Asian Paints or equivalent.
- Enamel paints for MS Grills.
- Exterior walls painted with weather shield paint, Asian paints or equivalent.
- Melamine Matt finishes paint for main door.
- Enamel paint for other door
Plumbing & sanitary fittings
- All ceramic fitting EWC and wash basins will be white (Hindware or equivalent).
- Provision for hot water connecting in individual heater of 15Liters capacity for each toilet.
- Hot and cold mixes for shower and tap in each toilet (Hindware CP fittings or equivalent fittings).
- Concealed plumbing lines from the overhead tank for each floors.
- Single bowl stainless steel sink with drain board in the Kitchen.
Electrical wiring & fittings
- Concealed copper wiring with Legrand / Crabtree or equivalent modular switches.
- HT connection with internal metering for units.
- Separate meter for lighting in common areas, the lift and the pumps.
- 3-phase will be provided for each apartment.
- 15-amp power plug sockets will be provided for water heaters in bathrooms and for air-conditioners in bedrooms.
- One 5-amp socket will be provided for each room, except in the living room, in addition to a multiple socket with 3 outlets will be provided for connection to TV etc.
- 2 way switches will be provided for fan and light in all bedrooms.
- Two no of 5 Amp Sockets and 1 no of 15A socket will be provided in the kitchen.
- One bell point will be provided.
- Fans points in living room, dinning & bedroom.
- Light points, in Living, dinning, Bed rooms, Kitchen, washing area & Balcony.
Electrical services
- DG backup for 2 BHK – 750watts Single Phase – Complete Lighting Fan & 6A Socket load with TV through ACCL.
- DG backup for 3 BHK – 1000watts Single Phase – Complete Lighting Fan & 6A Socket load with TV through ACCL.
